Wanhao Duplicator i3 PEI bed mod

PEI bed.jpg

PEI is the new wonder bed material for 3D printer. It has many advantages. Plastic sticks when hot and releases releases easily when cold. No need to apply messy sprays, glues and concoctions between prints. It leaves a nice smooth bottom layer, just like glass. It’s great!!

Hence I was keen to add this to my Wanhao i3’s list of mods. PEI is difficult to get in the UK at a reasonable price, but I was able to get some imported from Amazon US for about half the price as Mr Ebay UK wants to charge me. I also got some 3M 8153LE double sided adhesive as recommended by the great DC42.

The question then was how to attach it to my print bed. My PEI sheet is 1mm thick, but this will still bend under ABS warping forces so it really needed to be bonded to something more rigid. I could have used glass, but then I wouldn’t be able to flex the bed at all in case of a really well stuck part.Instead I decided to use some 1.6mm 2 sided copper clad FR4 (PCB material). The copper layers should work really well as a heat spreader and having it double sided would probably help stop any temperature induced warping.

This gave me a rather cool option. I could cut this into whatever shape and size I wanted, and it had always annoyed me that when printing anything close to the 200mm bed size of the Wanhao I would risk the nozzle falling off the edge. The Wanhao Mk2 heated bed is actually a bit larger than the 200mm so why not cut the FR4 to that size.

wdi3 pei bed mount top view.png

The mounting screws on my V2 Wanhao i3 are not countersunk and sit proud of the bed, which presents a problem and opportunity. With the FR4 it is no drama to drill some holes 5mm from the edge for the screw heads to sit inside. But hey, why not use those screw heads to hold the FR4 in position too. Good idea eh!

wdi3 pei bed mount cut view

I drilled the holes with a 4/4.5/5mm drill bit (can’t remember which). This made the holes ever so slightly smaller than the head of the screw. At this point the FR4 could be offered up to the bed to check alignment. All was good so I used a coutersink bit to enlarge the base of the hole slightly so it fit snugly on top of the screw heads. Time will tell if this is going to hold it in place securely enough. My build plate is still slightly tacky from the removal of the p-Buildtak (see bottom), but I can always attach the trusty bulldog clips if required.

I then cut the PEI sheet to size and bonded it to the surface of the FR4 with the 3m adhesive sheet and Bob’s your mothers brother the jobs done.

Two prints in and it’s really working great. I will probably need to lightly sand the PEI at some point, but for now it’s working fine as shipped.

Aside – The Wanhao i3 comes with a factory fitted sheet of pseudo build tak place directly on the bed. This can be peeled up, but leaves a horrid mess of glue on the surface. Scrapping this off is an absolute ball ache. I found the best way was to use a liberal dowsing of acetone and lots of kithen roll. This worked a like a charm.

UPDATE – 3 prints in. All relativly big. No failures. No warping and amazingly smooth bottom layer. https://youtu.be/sOeceZ6h1Qg

Tagged with: , , , , ,
Posted in Uncategorized
One comment on “Wanhao Duplicator i3 PEI bed mod

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: